All Product Reviews en-gb
My 2019 AT would not start after sitting for an extended period. After poking around I realized the pump wasn't priming when I turned the key on. The tank had some varnish build up, so I pulled it, cleaned it and ordered this pump after disassembly of the main pumping unit ($440 to replace with Honda OEM). Popped in this bad boy and bam I had prime and it ran once again.
Showing 1 to 3 of 3 (1 Pages)
Installed in my 2016 Kawasaki Ninja 650. The person I bought my motorcycle from left it sitting for a year so the old pump was completely ruined and almost caused me to break down getting it home. This is an amazing fuel pump especially for the money. Word of advice...if your old pump fails you may have crud in your actual gas tank and in the crevices of the pump (I sure did)....use contact/parts cleaner in the parts that aren't being replaced. Take your time and clean up EVERYTHING properly before you install this or you will ruin the brand new pump. Also..take pictures as you disassemble the pump and save yourself the hassle of trying to figure out what goes where. Anyways, you don't need to spend a bunch on a fuel pump rebuild kit when this comes with everything you need.