All Product Reviews en-gb
Product
o Author: oscar - 
perfect fit
item looks great！ quality products
Attachment Images
a Author: allen -
Works perfectly
Perfect drop in fit on my 2002 WRX. If I had to do it again, I'd just buy the pump and not the install kit since I was able to reuse everything from my factory setup with the exception of the pump itself. The factory harness fits the Walbro along with the factory fuel hose, sock, and clamps.
Attachment Images
S Author: Stephen Giles -
good price
I don't have a Walbro pump for this exact vehicle but on my 1993 Altima it has increased performance. The fuel efficiency runs about the same and performance has increased a lot. Since these pumps were so under rated I decided I had to share the good news. I took the chance with it since Walbro tells you the specs on its regular pumps and puts it side by side with its high pressure pumps. The high pressure pumps really do wonders.
Attachment Images
Product
M Author: MR P A DE WIT -
runs like new
Couldn’t get my 2019 Vulcan 900 Custom to run after replacing the fuel filter, pump, injectors, and spark plugs. I read on some forums that there is a secondary, unserviceable, strainer in the fuel pump assembly. So I purchased this one. Bike runs like new again.
Attachment Images
b Author: bulce zhang - 
OSIAS 525LPH HELLCAT E85 Intank Fuel Pump Kit Fit Walbro F90000285
OSIAS 525LPH HELLCAT E85 Intank Fuel Pump Kit Fit Walbro F90000285
D Author: Daniel -
Great customer service!!!
I purchased this pump a month ago for a project Prelude I am building and let me just say this pump is solid, strong. It even came with NPT to AN fittings to make life so much easier. I contacted OSIAS and they explained that the current load for this pump at 60+ PSI was going to be around 15 amps. My original pump never needed more than 10 amps. They also answered a few questions regarding my current setup and said they believe I may have a bad pump. A new pump has already been shipped out and on the way to me. Wow! That's incredible customer service and the fact that they replied to my questions in less than a day and even offered helpful input for my project makes it even greater. I may be having a few issues with my pump but it's also installed on a 1987 Honda that was known for rust contaminating the fuel system and I have replaced just about everything on it but I am still very happy that I chose this company.Thank you OSIAS!
Product
i Author: ivey -
better than kawasaki fuel pump
This fuel pump is a heck of a deal compared to the buying the whole sending unit from Kawasaki. My brute would not idle without dying. It ran great when riding until higher RPM's and the power would fall off. The problem was the factory pump was getting weak and not supplying the appropriate amount of fuel the engine was needing for high RPM's. Put this pump in and now it runs better than it ever has!! I highly recommend this product. I cant rate how it will hold up as I just put it in today. But I will update this review as time passes and I put some miles on this pump.
c Author: chaowei Lin -
They have grate customer service
Working perfectly genuine walbro 525 with install kit. I installed in my 1990 Gsx Eclipse and its fueling e85 rock solid at 79psi fuel pressure with 36psi boost and 43psi base pressure.
Attachment Images
J Author: Jose Muro -
Direct fit
My e30 turned on, worked fine for a month, now it’s hesitating yet I’m not sure if it’s due to any fuel starvation. But for the price I could not ask for anything that would last more than a month. I bought this because I wanted to diagnose a problem and did not want to spend too much.
Attachment Images
C Author: Cliff M Rickard -
So far works great
Installed in '08 Softail Custom FXSTC.
The box contained everything I needed to install, with several additional pieces I didn't use (for other models).
The supplied fuel line was too short and was not clamped on the pump.
My stock hose would not pull off my stock pump - so I cut it off below the hose at the pump and then drilled out the plastic nub inside the stock fuel hose (from cutting the nub off the stock pump). Then I used my factory hose with the supplied hose clamp.
Inlet sock connector didn't click into pump base very well (loose) and the sock opening itself didn't get a great a great seal into the pump, but it fit just fine. I question if this will cause premature failure in xxx miles. We'll see.
Overall I'm satisfied. I ride to work daily and did the install about a month ago.
Took me an hour to do the job - and I've never done a fuel pump before.